תיאור

Extrema interconnect XLR

eveloped to exceed reference quality in systems where cost is not an issue.
The construction of Extrema interconnects uses wires made of ultra-pure monocrystalline copper with a cross-section of 20 AWG, obtained using OCC technology. As always in our top designs, the hot and return conductors are physically separated from each other to minimize the mutual influence of magnetic fields. Moreover, the screen was moved away from the conductors as far as possible. Thanks to these solutions, Extrema interconnects are characterized by extremely low capacity and no phase shifts.
The main dielectric of these cables is air, the best known insulator for practical use, but posing the highest challenges. To be able to use it in our cable, the conductors were placed in Teflon sheaths, but thanks to their specific spiral structure, only a few percent of them come into contact with them, so losses resulting from contact with a hard insulator are completely negligible. At the same time, the stiffness of the shields provides an excellent mechanical barrier, protecting against vibrations caused by the current flowing through the conductor. Going further, cables are shielded in several ways, depending on their dedicated application. Then another cover is created by a multi-layer lagging, whose task is to finally dampen any vibrations. Cardas SRTCA SS (RCA) and Cardas XLR plugs complete the list of sophisticated components that ensure the signal is neither degraded nor colored.

Extrema interconnect RCA

Conductors: pure copper monocrystal OCC (Ohno Continous Casting), polished by hand, gauge: 20 AWG
Dielectics: uncoloured PTFE, air, kapton, poliolefin, poliurethan
Plugs RCA: Cardas SRCA SS
Plugs XLR: Cardas XLR or Oyaide Focus
Standard lenghts: 1, 1,5, 2m

ריטל 8299 יורו

ארץ פולין

יבוא לוינסון אודיו